Fig. 6From: Standardisation, calibration and correlation of the Kübler-index and the vitrinite/bituminite reflectance: an inter-laboratory and field related studyCorrelation between CIS standards used by L. Warr in Heidelberg (Table 2) to adapt the SW standard FWHM-values in ∆°2θ to Kübler-Index data measured in Basel. The plot was re-drawn from a plot of D. Schmidt. Due to the scattering and the broader FWHM values the traditional Kübler – Frey standards were used (Schmidt et al. 1997). Three to seven specimens were prepared from each SW standard. (n = 18, r = 0.98)Back to article page